Menu Close

Xray透明代理（TProxy）配置教程

XTrojan黑科技 Xray教程 2条评论
机场加速器梯子推荐：优质SS/SSR/Trojan/Xray/V2Ray机场推荐 | IPLC/IEPL专线加速器梯子推荐 | 解锁奈飞Netflix/HBO/Hulu等国外流媒体

本配置基于TProxy 透明代理的新 V2Ray 白话文教程，加入了 Xray 的新特性，使用 VLESS + XTLS Splice 方案，并将旧教程中默认出站代理的分流方式改为默认出站直连，使用者请按照实际情况进行修改。

本文中所有配置已在 Raspberry Pi 2B、Ubuntu 20.04 环境下测试成功，如在其它环境中使用请自行调整配置。

1、开始之前

请检查您的设备是否有可用的网络连接，且服务端已经配置成功，客户端已经安装完毕。

需注意的是，目前很多透明代理教程都会将 Linux 系统的 IP 转发打开，但这样会导致 Splice 性能下降。详情请参考大案牍术破案纪实第三篇–我们是如何破解 Splice 性能下降甚至低于 Direct 之谜的。

这里我想要补充的是，很多透明代理教程会使用 Netfilter 进行分流，使直连流量直接发出而不经过 Xray，这时必须开启 IP 转发；也有的教程，如本文，会将所有流量导入 Xray 之中，由 Xray 的路由模块进行分流，这时无需开启 IP 转发。

2、Xray 配置

{
    "log": {
        "loglevel": "warning",
        "error": "/var/log/xray/error.log",
        "access": "/var/log/xray/access.log"
    },
    "inbounds": [
        {
            "tag": "all-in",
            "port": 12345,
            "protocol": "dokodemo-door",
            "settings": {
                "network": "tcp,udp",
                "followRedirect": true
            },
            "sniffing": {
                "enabled": true,
                "destOverride": [
                    "http",
                    "tls"
                ]
            },
            "streamSettings": {
                "sockopt": {
                    "tproxy": "tproxy"
                }
            }
        }
    ],
    "outbounds": [
        {
            "tag": "direct",
            "protocol": "freedom",
            "settings": {
                "domainStrategy": "UseIPv4"
            },
            "streamSettings": {
                "sockopt": {
                    "mark": 2
                }
            }
        },
        {
            "tag": "proxy",
            "protocol": "vless",
            "settings": {
                "vnext": [
                    {
                        "address": "服务端域名",
                        "port": 443,
                        "users": [
                            {
                                "id": "UUID",
                                "flow": "xtls-rprx-splice",
                                "encryption": "none"
                            }
                        ]
                    }
                ]
            },
            "streamSettings": {
                "network": "tcp",
                "security": "xtls",
                "sockopt": {
                    "mark": 2
                }
            }
        },
        {
            "tag": "block",
            "protocol": "blackhole",
            "settings": {
                "response": {
                    "type": "http"
                }
            }
        },
        {
            "tag": "dns-out",
            "protocol": "dns",
            "settings": {
                "address": "8.8.8.8"
            },
            "proxySettings": {
                "tag": "proxy"
            },
            "streamSettings": {
                "sockopt": {
                    "mark": 2
                }
            }
        }
    ],
    "dns": {
        "hosts": {
            "服务端域名": "服务端 IP"
        },
        "servers": [
            {
                "address": "119.29.29.29",
                "port": 53,
                "domains": [
                    "geosite:cn"
                ],
                "expectIPs": [
                    "geoip:cn"
                ]
            },
            {
                "address": "223.5.5.5",
                "port": 53,
                "domains": [
                    "geosite:cn"
                ],
                "expectIPs": [
                    "geoip:cn"
                ]
            },
            "8.8.8.8",
            "1.1.1.1",
            "https+local://doh.dns.sb/dns-query"
        ]
    },
    "routing": {
        "domainStrategy": "IPIfNonMatch",
        "rules": [
            {
                "type": "field",
                "inboundTag": [
                    "all-in"
                ],
                "port": 53,
                "outboundTag": "dns-out"
            },
            {
                "type": "field",
                "ip": [
                    "119.29.29.29",
                    "223.5.5.5"
                ],
                "outboundTag": "direct"
            },
            {
                "type": "field",
                "ip": [
                    "8.8.8.8",
                    "1.1.1.1"
                ],
                "outboundTag": "proxy"
            },
            {
                "type": "field",
                "domain": [
                    "geosite:category-ads-all"
                ],
                "outboundTag": "block"
            },
            {
                "type": "field",
                "domain": [
                    "geosite:geolocation-!cn"
                ],
                "outboundTag": "proxy"
            },
            {
                "type": "field",
                "ip": [
                    "geoip:jp",
                    "geoip:us",
                    "geoip:sg",
                    "geoip:hk",
                    "geoip:tw",
                    "109.239.140.0/24",
                    "14.102.250.18",
                    "14.102.250.19",
                    "149.154.164.0/22",
                    "149.154.168.0/22",
                    "149.154.172.0/22",
                    "174.142.105.153",
                    "50.7.31.230",
                    "67.220.91.15",
                    "67.220.91.18",
                    "67.220.91.23",
                    "69.65.19.160",
                    "72.52.81.22",
                    "85.17.73.31",
                    "91.108.4.0/22",
                    "91.108.56.0/22",
                    "91.108.56.0/23",
                    "108.177.120.94",
                    "108.177.120.0/24",
                    "172.217.0.0/16",
                    "74.125.0.0/16",
                    "23.246.0.0/18",
                    "37.77.184.0/21",
                    "45.57.0.0/17",
                    "64.120.128.0/17",
                    "66.197.128.0/17",
                    "108.175.32.0/20",
                    "192.173.64.0/18",
                    "198.38.96.0/19",
                    "198.45.48.0/20",
                    "173.245.48.0/20",
                    "103.21.244.0/22",
                    "103.22.200.0/22",
                    "103.31.4.0/22",
                    "141.101.64.0/18",
                    "108.162.192.0/18",
                    "190.93.240.0/20",
                    "188.114.96.0/20",
                    "197.234.240.0/22",
                    "198.41.128.0/17",
                    "162.158.0.0/15",
                    "104.16.0.0/12",
                    "172.64.0.0/13",
                    "131.0.72.0/22",
                    "144.220.0.0/16",
                    "52.124.128.0/17",
                    "54.230.0.0/16",
                    "54.239.128.0/18",
                    "52.82.128.0/19",
                    "99.84.0.0/16",
                    "204.246.172.0/24",
                    "54.239.192.0/19",
                    "70.132.0.0/18",
                    "13.32.0.0/15",
                    "205.251.208.0/20",
                    "13.224.0.0/14",
                    "13.35.0.0/16",
                    "204.246.164.0/22",
                    "204.246.168.0/22",
                    "71.152.0.0/17",
                    "216.137.32.0/19",
                    "205.251.249.0/24",
                    "99.86.0.0/16",
                    "52.46.0.0/18",
                    "52.84.0.0/15",
                    "204.246.173.0/24",
                    "130.176.0.0/16",
                    "205.251.200.0/21",
                    "204.246.174.0/23",
                    "64.252.128.0/18",
                    "205.251.254.0/24",
                    "143.204.0.0/16",
                    "205.251.252.0/23",
                    "204.246.176.0/20",
                    "13.249.0.0/16",
                    "54.240.128.0/18",
                    "205.251.250.0/23",
                    "52.222.128.0/17",
                    "54.182.0.0/16",
                    "54.192.0.0/16",
                    "103.2.30.0/23",
                    "125.209.208.0/20",
                    "147.92.128.0/17",
                    "203.104.144.0/21",
                    "91.108.8.0/22",
                    "91.108.12.0/22",
                    "91.108.16.0/22",
                    "149.154.160.0/20",
                    "3.123.36.126/32",
                    "35.157.215.84/32",
                    "35.157.217.255/32",
                    "52.58.209.134/32",
                    "54.93.124.31/32",
                    "54.162.243.80/32",
                    "54.173.34.141/32",
                    "54.235.23.242/32",
                    "169.45.248.118/32"
                ],
                "outboundTag": "proxy"
            }
        ]
    }
}

TIP

本配置会劫持所有发往 53 端口的流量以解决 DNS 污染问题，所以客户端和本机的 DNS 服务器的地址可以随意配置。

此外，由于内置的 geoip.dat 文件无法完美实现路由分流，故在配置文件中格外添加了一些 IP。

3、策略路由配置

# ip route add local default dev lo table 100 # 添加路由表 100
# ip rule add fwmark 1 table 100 # 为路由表 100 设定规则

4、Netfilter 配置

注意

nftables 配置与 iptables 配置二选一，不可同时使用。

#!/usr/sbin/nft -f

flush ruleset

define RESERVED_IP = { 10.0.0.0/8, 100.64.0.0/10, 127.0.0.0/8, 169.254.0.0/16, 172.16.0.0/12, 192.0.0.0/24, 224.0.0.0/4, 240.0.0.0/4, 255.255.255.255/32 }

table ip xray {
chain prerouting {
type filter hook prerouting priority mangle; policy accept;
ip daddr $RESERVED_IP return
ip daddr 192.168.0.0/16 tcp dport != 53 return
ip daddr 192.168.0.0/16 udp dport != 53 return
ip protocol tcp tproxy to 127.0.0.1:12345 meta mark set 1
ip protocol udp tproxy to 127.0.0.1:12345 meta mark set 1
}
chain output {
type route hook output priority mangle; policy accept;
ip daddr $RESERVED_IP return
ip daddr 192.168.0.0/16 tcp dport != 53 return
ip daddr 192.168.0.0/16 udp dport != 53 return
meta mark 2 return
ip protocol tcp meta mark set 1
ip protocol udp meta mark set 1
}
}

使用方法

 

将上述配置写入一个文件（如 nft.conf），之后将该文件赋予可执行权限，最后使用 root 权限执行该文件即可（# ./nft.conf）。

配置完成后，将局域网内其它设备的默认网关改为该设备 IP，就可以直接翻墙了。在其它主机和本机皆测试成功后，可进行下一步配置。

5、配置永久化与开机自启

首先将已经编辑好的 nftables 配置文件移动到 /etc 目录下，并重命名为 nftables.conf。然后编辑 /lib/systemd/system/nftables.service。

[Unit]
Description=nftables
Documentation=man:nft(8) http://wiki.nftables.org
Wants=network-pre.target
Before=network-pre.target shutdown.target
Conflicts=shutdown.target
DefaultDependencies=no

[Service] Type=oneshot RemainAfterExit=yes StandardInput=null ProtectSystem=full ProtectHome=true ExecStart=/usr/sbin/nft -f /etc/nftables.conf ; /usr/sbin/ip route add local default dev lo table 100 ; /usr/sbin/ip rule add fwmark 1 table 100 ExecReload=/usr/sbin/nft -f /etc/nftables.conf ExecStop=/usr/sbin/nft flush ruleset ; /usr/sbin/ip route del local default dev lo table 100 ; /usr/sbin/ip rule del table 100

[Install]
WantedBy=sysinit.target

最后 enable 即可。

相关文章：

  1. Xray透明代理transparent_proxy
  2. Cloudflare CDN自定义IP+Xray+WS+TLS，拯救垃圾线路小鸡，亲测10$/年PR小鸡满血复活
  3. 一键搭建Xray服务器，并使 WordPress 和宝塔面板共存
  4. Nginx SNI分流（端口复用）使用 Xray+VLESS+XTLS
标签：Xray, Xray透明代理, Xray配置教程

2条评论

发表回复

您的电子邮箱地址不会被公开。 必填项已用 * 标注